Description: Tamiya Hotshot (58391) / Hotshot 2 (58062) / Super Hotshot (58517) Bearing Kit Tamiya Hotshot (58391) / Hotshot 2 (58062) / Super Hotshot (58517) Bearing Kit Plaig Bearings Tamiya Hotshot (58391) / Hotshot 2 (58062) / Super Hotshot (58517) Bearings, standard kit, Australian product. Complete Bearing Kit to suit the Tamiya Hotshot (#58391), Hotshot 2 (#58062) & Super Hotshot 2012 (#58517).: 5x11x4mm Bearings X 17 5x8x2.5mm Bearing X 5 Standard Bearings are ABEC 3 and designed specifically for RC Cars, they are better than the original factory bearings of most RC manufacturers. Bearing Materials SAE 52100 Chrome Steel Balls • Higher hardness for longer life ratings • Low cost for high performance • Good for temperatures up to 150°C • Poor corrosion resistance (if left exposed) This is the standard steel for most ball bearings. It is harder than stainless steel and gives greater life ratings. It also has superior-low noise qualities to standard 440-grade stainless steel. Chrome steel actually has a low chromium content and is not corrosion resistant, all Plaig bearings are assembled with Shell AF2 Oil as chrome bearings require an oil coating on the exterior surfaces to protect against corrosion which can contaminate the inside of the dry bearing. Chrome steel can tolerate continuous temperatures of up to 150°C. Above this temperature, bearing life is significantly reduced. PTFE Heat Resistant Rubber Seals • Excellent corrosion resistance to water, salt water and most chemicals. • Good high temperature performance. • Non magnetic. • Only semi-precision grade is possible. • Maximum temperature 260°C. The PTFE Seal is rubber bonded to a metal washer. The inner lip of the seal rubs against the bearing inner ring to provide an effective seal against smaller particles such as dust and moisture while preventing lubricant leakage. Bearing Retainer / Cage Retainers keep the balls evenly spaced around the raceway preventing ball to ball contact and thus allowing higher speeds. They also help to retain grease around the balls and raceways. For greater accuracy and to prevent any additional friction, it is important that the retainer is not allowed too much radial movement. Standard bearings use a Carbon Steel Crown Retainer. Shipping Will post with Australia Post, normally shipped out next business.
Price: 33.9 AUD
Location: Burwood
End Time: 2024-11-30T10:35:25.000Z
Shipping Cost: 16.72 AUD
Product Images
Item Specifics
Restocking fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Brand: Plaig Bearings
MPN: Does Not Apply
Compatible Scale: 1:10
Compatible Brand: For Tamiya
