Description: Rear View Funle Camera Mount Under Rear Light Adapter for Magicycle e-bike & More Please Read Below: This adapter plate was designed and made 100% by me specifically for a Magicycle Cruiser E-Bike and a Funle Bike Rear view Camera Mirror (Sold separately). It will work with many other brands of camera's that use the same mount. It will likely work with any other bike that uses the same 4" tail light mount but can only be guaranteed to fit the Magicycle Cruiser/Cruiser Pro. Two mounting positions available measured middle of stud to middle of stud. 2" and 3 1/8" (52mm and 80mm). The holes also allow for some shifting for alignment if needed. Measures 4" Wide (102mm) by 2 1/4" high (56mm). Please note: This is a 3D Printed adapter plate only, you must supply the threaded socket (as shown in photos), screw to hold socket, camera and retaining ring all of which would be in your existing camera kit. Remove the socket from the post mount and attach it to the tail light adapter plate. Printed in PETG for outdoor use. Other colors available but most of the adapter is unseen, please let me know if you have a request and I will try to accommodate. Please let me know if you have any questions.
Price: 14.95 USD
Location: Germansville, Pennsylvania
End Time: 2025-01-08T14:58:30.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Unbranded
Color: Black
Item Height: 2.25 Inches
Material: 3D Printed PETG
Country/Region of Manufacture: United States
Number of Items: 1
Item Width: 4 Inches
Part Type: Camera Mount Adapter
