Description: iCarsoft CR PRO Professional UNIVERSAL Scanner ToolALL MAKES - ALL SYSTEMS The iCarsoft CR PRO is a professional fault diagnostic tool designed for use on more than 40 different vehicle makes. This tool can communicate with ALL VEHICLE SYSTEMS. The CR PRO is an easy to use, stand alone unit that will have you scanning your vehicle within minutes. Simply, plug it into the OBD II port and the device will boot up with step-by-step instructions. This scanner has a large, easy to read 4 inch LCD screen accompanied by a user friendly interface that requires no additional software. ***We fully update software before shipment and offer phone support before/after sale.*** This tool is the newest version in the iCarsoft line of products and updates the CR PLUS. EXTRA FUNCTIONS INCLUDE: Oil/Service/Brake Service Reset Function The iCarsoft 2nd Generation Diagnostic Tools allow you to reset Oil,Service, and Brake Lights in a click of a button on supported vehicles. On vehicles where a manual reset is required, the tool will guide you through the full process step-by-step. Battery Management System (BMS) Registers new battery to the BMS during battery replacement. EPB Reset Function Brake Pad / Shoe changes on vehicles equipped with EPB's (Electronic Parking Brakes) MUST be carried out using a Diagnostic Tool to correctly re-calibrate. The iCarsoft 2nd Generation Tools offer you that capability on supported models. De-activate to Service Position - Replace - Re-activate. ECTS Reset Function After cleaning or replacing the Electronic Throttle Body (ECTS), adaptation must be carried out (also the case if the negative terminal of the battery has been disconnected or when the Engine Control Unit has been replaced). The iCarsoft 2nd Generation Tools will perform Electronic Throttle Body adaptations on supported vehicles. SAS Reset Function The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The signal is mainly used by the ABS System as part of it's stability control function but also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly. If the Steering Angle Sensor (SAS) needs to be changed, many vehicle's require the new sensor to be calibrated. The iCarsoft 2nd Generation Tool will allow you to carry out steering angle re-calibration on supported models. DPF Regeneration or Replacement Carry out a forced Diesel Particulate Filter (DPF) Regeneration on supported vehicles - this MUST be done by trained personnel. Required when the DPF filter blockage reaches levels where passive or active regeneration is unable to burn off the excess soot. The iCarsoft 2nd Generation Tool is also capable of adapting a new DPF Filter where supported. iCarsoft CR Pro Multi-System Professional Diagnostic ToolFOR MULTI-BRAND VEHICLESALL SYSTEMS. ALL VEHICLE MAKES. ALL POWERFUL.MORE SPECIAL FUNCTIONS.MORE PERFORMANCE.MORE PRO iCarsoft CR Pro is a Professional and powerful vehicle fault diagnosis tool for multi-brand vehicles (more than 40 kinds of vehicle makes) developed by iCarsoft Technology Inc. With a 4.0” TFT LCD and unique diagnostic software, it features full ECU diagnosis of most vehicle brands and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accurately diagnose complex problems. CR Pro vehicle coverage:Nissan,Infiniti,Toyota,Lexus,Scion,Honda,Isuzu,Hyundai,Kia,Daewoo,Mazda,US Ford,Sprinter,BMW,Mini,VW,Seat,Skoda,Volvo,Porsche,SAAB,EU Ford,Holden,AUS Ford,Acura,Subaru,Mitsubishi,Dacia,Renault,Fiat,GM,Chrysler,Mercedes-Benz,Citroen,Jaguar,Peugeot,Audi,Opel,Land Rover,Smart,Suzuki,Vauxhall,Alfa-Romeo,Lancia. ① BACK BUTTON--Returns to previous menu.② UP BUTTON--Moves cursor up for selection.③ LEFT BUTTON--Moves cursor up for selection.④ RIGHT BUTTON--Moves cursor down for selection.⑤ DOWN BUTTON--Moves cursor down for seiection.⑥ ENTER BUTTON--Confirms a selection(or action) from a menu list.⑦ HELP BUTTON--Shows help information for test results or user operation⑧ F1 FUNCTION BUTTON--In case of special use.⑨ F2 FUNCTION BUTTON--In case of special use.⑩ OBDII CONNECTOR--Connects the scan tool to the vehicle's Data Link Connector via OBDII Cable.⑪ STORAGE CARD SLOT--Holds the system of the scan tool.⑫ Data Cable CONNECTOR--Connects the scan tool for power supply and update the software if needed.FEATURES & BENEFITS• iCarsoft CR Pro can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and Airbag etc. • Support OBDII/EOBD Ten Modes of Operation.• Read Live Data.• Full ECU Diagnosis. • Applies to most of the vehicle models which equipped with OBDII-16 DLC.• Easy To Use with Silicone Keys.• Oil Light/Service Reset: Support service lamp reset.• Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization.• Battery Management System (BMS), registers new battery to the BMS while battery replacement.• Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator. • Electronic Throttle Control system (ETC) relearns the throttle valve control value while clear or replaces the throttle valve.• Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.• The Print Data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.• Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.• DTC Library to lookup when user is operating this tool.• Upgrade via PC.• Multi-language: English, German, Dutch, Spanish, French.Note:Certain functions may be limited from the vehicle manufacturer due to the requirement ofa special factory access code.This scan tool covers over 20 years of models, so some functions may not be availableon all years/models.FIFTEEN SUPER ADVANTAGES• Diagnose most Models (OBDII-16DLC)• Full System Diagnosis• Supports Oil Service Reset• Electronic Parking Brake (EPB) system maintenance• Battery Management System (BMS) (Some vehicles do not enjoy this function)• Diesel Particulate Filter (DPF) Regeneration Control System• Electronic Throttle Control System (ETC)• Steering Angle Sensor (SAS) Calibration • Read &Clear DTC• Read Live Data• Supports Battery Test• Supports Data Review and Print• Full Speed Upgrade via Computer• 4.0″ TFT LCD, 480*320 Pixels• Supports Multi-LanguageOBDII FUNCTION1. Read Codes2. Erase Codes3. I/M Readiness -- I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing. 4. DataStream5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freezeframe data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.8. Evap System Test -- The EVAP test function lets you initiate aleak test for the vehicle's EVAP system. Before using the systemtest function, refer to the vehicle'sservice repair manual to determine the procedures necessary to stop the test.9. Vehicle Information -- The option displays the vehicle identification number (VIN),the calibration verification number (CVN), and other information of the test vehicle.10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes11.Turn off Check Engine Light (MIL), clear codes and reset monitors12. Read live PCM DataStream13. Support CAN (Controller Area Network) and all other14.Multilingual menu and DTC definitions- English, Spanish, and German, etc.15.Read pending DTCs16.Read permanent DTCs17. DTCs search18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.19. Works on most of 2001 and later OBDII compliant PETROL European vehicles20. Works on most of 2004 and later OBDII compliant DIESEL European vehicles21. Works on most of 1996 and later OBDII compliant US and Asian vehicles22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.23. Comprehensive Help, Including OBD Parameter, Mode Explanations & MoreSPECIFICATIONS• Display: 4.0″ TFT LCD, 480*320 Pixels• Operation Temperature: 0°C ~ 50°C• Storage Temperature: -20°C ~ 70°C• Operating Voltage: 9 ~ 18V• Operating Current: 150mA@12V (Typical)• Power Consumption: 1.8W (Typical)• Dimension: 206*104.1*32.6 mm (L x W x H)Contents:● Main Unit● Hardcopy User's Manual● Main cable● Data cable● TF Card (Within the main unit)● Nylon carry case Shipping and Payment Orders placed before 12pm PST will ship same day. Otherwise, they ship within 24 hours. Orders are shipped free of charge via USPS Priority Mail with tracking. Payment only accepted through PayPal. Returns In the rare event an item is defective or damaged, returns will be accepted within 30 days of receipt or a replacement part will be shipped to you free of charge. Contact Us For questions or comments, please contact us through the ebay system by clicking "Ask a Question" found below. Be sure to contact us if you are unsure whether this scanner will work with your vehicle. may also call or text Matt with questions 9am-6pm PST 5702six24806
Price: 249 USD
Location: Portland, Oregon
End Time: 2024-08-17T04:32:35.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Supported System: BMS, Transmission, ABS, DPF, EPB, SAS, SRS, TPMS
OBD Interface: CAN, EOBD, OBDII
Connectivity: OBDII
Features: Backlit Display, Check Engine Light Shut Off, Color Display, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly
Manufacturer Part Number: CR PRO
Vehicle Type: Passenger Vehicle
Accessories: Adapter Cable, Carrying Case, Memory Card, USB Cable, User Guide
Brand: iCarsoft
Warranty: 1 Year
