HELIX M SIX DSP 6x130w / 3x260w RMS with 10-Ch DSP + M FOUR 4x135w / 2x270w NEW

Description: HELIX COMBO HELIX M SIX DSP 6x100w RMS + 10-Channel DSP HELIX M FOUR 4x100w RMS 4-Ohm Bridgeable Amplifier HELIX M SIX DSP Features § Up to 130 Watts RMS max. output power per channel into 4 & 2 Ω § Extremely powerful 64 Bit “fixed point” Audio DSP and state-of-the-art AD and DA signal converters § ACO – Advanced 32 Bit CoProcessor platform for enhanced system and DSP features like: § ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signals § SFX sound effects – Augmented Bass Processing, StageXpander, RealCenter & Co. § Smart 6-channel highlevel input with ADEP.3 circuit § Four RCA / Cinch line outputs with max. 6 Volts output voltage § Virtual Channel Processing (VCP) allows even more flexible configuration for highly complex sound systems § Bridgeable amplifier channels for driving powerful woofer or subwoofer § DSP-board manufactured in Germany Technical data Power RMS ≤ 1% THD+N - @ 4 Ohms 6 x 100 Watts - @ 2 Ohms 6 x 100 Watts - @ 1 Ohm - - bridged @ 4 Ohms 3 x 200 Watts - bridged @ 2 Ohms - Max. output power per channel* Up to 130 Watts RMS @ 4 / 2 Ohms Amplifier technology Class D Inputs 6 x RCA / Cinch 6 x Highlevel speaker input 1 x Optical SPDIF (12 - 96 kHz) 1 x Remote In Input sensitivity RCA / Cinch 1 - 4 Volts Highlevel 5 - 20 Volts Input impedance RCA / Cinch 22 kOhms Input impedance highlevel 9 - 33 Ohms or 20 kOhms Outputs 6 x Speaker output 4 x RCA / Cinch 2 x Remote Out Output voltage RCA / Cinch 6 Volts Frequency response 20 Hz - 22,000 Hz DSP resolution 64 Bit DSP power 295 MHz (1.2 billion MAC operations/second) Sampling rate 48 kHz DSP type Audio signal processor Signal-to-noise ratio digital input 105 / 108 dB Speaker / Line Output (A-weighted) Signal-to-noise ration analog input 102 / 105 dB Speaker / Line Output (A-weighted) Distortion (THD) < 0.03 / 0.005 % Speaker / Line Output Damping factor 100 Operating voltage 10.5 - 16 Volts (max. 5 sec.down to 6 Volts) Idle current 1950 mA Max. remote output current 500 mA Operating temperature range -40° C to +70° C Fuse 2 x 35 A Maxi-fuse (APX) Power rating DC 12 V ⎓ 80 A max. Additional features ADEP.3 circuit, Auto Remote switch, 32 Bit CoProcessor, Control Input Dimensions (H x W x D) 50 x 320 x 154 mm / 2.00 x 12.60 x 6.06” * In typical multi-channel applications (2- / 3-way system + rear + subwoofer) HELIX M FOURFeatures§ Small footprint Class D amplifier with high output power of 100 Watts RMS @ 4 and 2 Ohms load§ Start-Stop capability down to 6V supply voltage§ Smart highlevel input with ADEP circuit (Advanced Diagnostics Error Protection) and Auto Turn-On function§ Integrated, active crossover with highpass, lowpass and bandpass§ “Input mode” switch for flexible input signal routing§ SMD (Surface Mounted Device) manufacturing technology combines minimum space requirement with maximum reliability§ Exclusive, extremely compact and clean design with illuminated HELIX-logo and low heat dissipation thanks to extraordinary efficiencyTechnical dataOutput power RMS ≤ 1% THD+N - @ 4 Ohms4 x 100 Watts- @ 2 Ohms4 x 100 Watts- @ 1 Ohm-- bridged @ 4 Ohms2 x 200 Watts- bridged @ 2 Ohms- Max. output power per channel*Up to 135 Watts RMS @ 4 / 2 OhmsAmplifier technologyClass DInputs4 x RCA / Cinch4 x Highlevel speaker input1 x Remote InInput sensitivityRCA / Cinch 0.5 - 6 VoltsHighlevel 1.3 - 13 VoltsInput impedance RCA / Cinch20 kOhmsInput impedance highlevel9 - 33 OhmsOutputs4 x Speaker outputOutput voltage RCA / Cinch- Signal converter for digital input- Frequency response10 Hz - 30,000 HzBass boost- Highpass15 Hz - 4,000 Hz adjustableLowpass40 Hz - 4,000 Hz adjustableBandpass15 Hz - 4,000 Hz adjustableSubsonic- Phase- Slope high- / lowpass12 dB/Oct.Slope subsonic / lowpass- Signal-to-noise ratio digital input- Signal-to-noise ratio analog input98 dB (A-weighted)Distortion (THD)0.05 %Damping factor100Operating voltage10.5 - 16 Volts (max. 5 sec. down to 6 Volts)Idle current1,100 mAOperating temperature range-40° C to +70° CFuse2 x 30 A Maxi-fuse (APX)Power ratingDC 12 V ⎓ 45 A max.Additional featuresActive, adjustable crossover, input mode switch, Start-Stop capability, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP)Dimensions (H x W x D)50 x 230 x 154 mm /2.00 x 9.06 x 6.06”

Price: 1149 USD

Location: Yakima, Washington

End Time: 2024-12-08T15:08:05.000Z

Shipping Cost: 0 USD