Description: Remanufactured crankshaft - believe to be a 6.1 but with the part number it might be a 6.2. Not sure. Has 4 bolt reluctor for Gen III VVT engine. If you are going to use it with a blower or just want to make sure the damper never slips cut a couple of 1/4 grade 8s or 10.3s bolts to use as pins. Installed in a Gen 3 VVT block for a 2013 Chrysler 300 C AWD project with a whipple stage 2 blower. Block replaced with an Arrington block due to some kind of blow by after 30 second start up pushed oil out rear seal. I do not have a use for this crank but you probably do if you are looking at the listing. Pix reflect the measurements I took with my calipers: Main bearings5 - 2.5614 - 2.5603 - 2.5642 - 2.56151 - 2.565 Conrods4 - 2.1293 - 2.128 (almost 2.1279)2 - 2.1331 - 2.128 Rear seal rotating surface (for lack of better name) 3.945Nose 1.502
Price: 695 USD
Location: Garland, Texas
End Time: 2024-11-13T04:04:30.000Z
Shipping Cost: 5 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Mopar
Manufacturer Part Number: 1657458AA
Material: Steel
Item Weight: 54.6lb.
